Filter
Top Products
Controls and functions
5 En
INTRODUCTION
1 Infrared transmitter
Outputs infrared controls signals. Aim this transmitter at
the component you want to operate.
2 Numeric buttons, ENTER
Selects the desired preset DAB services (see page 15) or
FM/AM stations (see page 23).
3 FUNCTION/FM MODE
• Activates the DAB function setup mode when this unit
is in the DAB tuning mode (see page 13).
• Switches the FM radio wave reception mode (stereo or
monaural) when this unit is in the FM tuning mode (see
page 19).
4 SELECT/TUNING MODE
Selects the tuning mode (automatic, manual, or preset
tuning) when this unit is in the FM/AM tuning mode.
5 POWER
Turns on this unit. Press this button again to set this unit to
the standby mode (see page 9).
In the standby mode, this unit consumes a small amount of power
in order to receive infrared signals from the remote control.
6 BAND
Selects the reception band (DAB, FM, or AM).
7 INFO/TEXT
Turns on and changes the Radio Data System or DAB
service information in the front panel display.
8 AUTO SCAN
Starts the automatic scanning function when this unit is in
the DAB tuning mode (see page 11).
9 MEMORY
Sets this unit to the preset station memory mode when this
unit is in the DAB tuning mode (see page 15) or FM/AM
tuning mode (see pages 21 and 22).
0 CLEAR
Deletes the preset memory of the currently selected preset
station number (see pages 16 and 22).
A TUNING
k / n
• Selects the preset DAB, FM, or AM stations or services
when this unit is in the preset tuning mode.
• Selects the DAB, FM, or AM stations or services when
this unit is not in the preset tuning mode.
Remote control
Operating with Yamaha AV amplifier remote controls
You can also operate this unit by using the remote control supplied with your Yamaha AV amplifier (such as
DSP-AX861SE). See page 28 for details.
FUNCTION
ENTER CLEAR
8
5
2
0
7
4
1
9
6
3
MEMORY
AUTO SCAN
INFO/TEXT
DAB/FM/AM
POWER
BAND
SELECT
FM MODE
TUNING MODE
TUNING
1
2
3
4
5
6
7
8
9
0
A
Note