Filter
Top Products
Controls and functions
4 En
1 STANDBY/ON
Turns on this unit. Press this button again to set this unit to
the standby mode (see page 9).
In the standby mode, this unit consumes a small amount of power
in order to receive infrared signals from the remote control.
2 Front panel display
Displays information of the currently tuned DAB, FM, or
AM radio station or the operational status (see page 6).
3 PRESET/TUNING
• Selects the preset DAB, FM, or AM stations or services
when this unit is in the preset tuning mode.
• Selects the DAB, FM, or AM stations or services when
this unit is not in the preset tuning mode.
4 DIMMER
Sets the brightness of the front panel display (see page 6).
y
Press and hold DIMMER for 3 seconds to display the firmware
version of this unit. This information is factory use only.
5 AUTO SCAN
Starts the automatic scanning function when this unit is in
the DAB tuning mode (see page 12).
6 MEMORY
Sets this unit to the preset station memory mode when this
unit is in the DAB tuning mode (see page 15) or FM/AM
tuning mode (see pages 21 and 22).
7 BAND
Selects the reception band (DAB, FM, or AM).
8 INFO/TEXT
Turns on and changes the Radio Data System (see
page 23) or DAB service information (see page 17) in the
front panel display.
9 FUNCTION/FM MODE
• Activates the DAB function setting mode when this
unit is in the DAB tuning mode (see page 13).
• Switches the FM radio wave reception mode (stereo or
monaural) when this unit is in the FM tuning mode (see
page 19).
y
Press and hold FUNCTION/FM MODE for 5 seconds to set this
unit to the initial factory settings (see page 27).
0 SELECT/TUNING MODE
Selects the tuning mode (automatic, manual, or preset
tuning) when this unit is in the FM/AM tuning mode.
Controls and functions
Front panel
STANDBY
/ON
DIMMER AUTO SCAN MEMORY BAND INFO/TEXT FUNCTION SELECT
DAB/FM/AM FM MODE TUNING MODE
PRESET/TUNING
123
456 7 890
Note