Filter
Top Products
22 En
FM/AM tuning
■ Manual station preset
Use this feature to store the desired FM and AM stations
to the preset station memory manually.
1 Tune into the desired FM/AM station.
See page 19 for tuning instructions.
2 Press MEMORY on the front panel (or
remote control).
The preset station number flashes in the front panel
display for 5 seconds.
3 Rotate PRESET/TUNING on the front panel
(or press the numeric buttons on the
remote control) to select the desired preset
station number while the preset station
number flashes.
Perform the next operation within 5 seconds after selecting
the preset station number. If you do not press MEMORY
within 5 seconds, the preset is canceled.
4 Press MEMORY on the front panel (or
remote control) again to confirm the preset.
• Any stored station data existing under a preset station number is
cleared when you store a new station under the same preset
station number.
• The reception mode (stereo or monaural) is stored along with
the station frequency.
■ Clearing the preset station
1 Select the desired preset station number.
Refer to “Tuning into the preset stations” on page 23
for details.
2 Press CLEAR on the remote control.
The selected preset station number flashes in the front
panel display.
Perform the next operation within 5 seconds after pressing
CLEAR. If you do not press CLEAR within 5 seconds, the
clearing is canceled.
3 Press CLEAR to confirm.
“Preset 1 clear” appears in the front panel display.
Note
Notes
CH01 FM 99.80MHz
Preset station number
Note
CH01 FM 99.80MHz
Flashes
Preset 1 clear