Filter
Top Products
24 En
FM/AM tuning
• Select “PROGRAM SERVICE” to display the
name of the Radio Data System program currently
being received.
• Select “PROGRAM TYPE” to display the type of
the Radio Data System program currently being
received.
• Select “RADIO TEXT” to display the information
on the Radio Data System program currently being
received.
• Select “CLOCK TIME” to display the current time.
• Select “TRAFFIC ANNOUNCE” to display the
traffic information. When you select this display
mode, this unit searches the Radio Data System
broadcasting station that provides the TRAFFIC
ANNOUNCE Radio Data System service
automatically.
• It may take a while for this unit to receive all of the Radio Data
System data from the station.
• If the signals being received are not strong enough, this unit
may not be able to utilize the Radio Data System data. In
particular, the “RADIO TEXT” mode requires a large amount
of data and may not be available even when the other Radio
Data System display modes are available.
• In case of poor reception condition, press FM MODE on the
front panel (or remote control) to select the monaural reception
mode (see page 19).
• If the signal strength is weakened by external interference while
this unit is receiving the Radio Data System data, the reception
may be cut off unexpectedly.
• When the “RADIO TEXT” mode is selected, this unit can
display the program information by a maximum of 128
alphanumeric characters, including the umlaut symbol.
Unavailable characters are displayed with the “_” (underscore).
The displayed information scrolls continuously.
Notes