Filter
Top Products
43
English
SET MENU
ADVANCED
OPERATION
Use this menu to manually adjust any input setting.
1 Press AMP to select the AMP mode, then
press SET MENU.
2 Press k/n repeatedly to select INPUT menu,
then press h.
3 Select the desired parameters, then press
ENTER to access and adjust.
■ Input Assign (Input assignment)
You can assign how this unit’s DIGITAL INPUT jacks
correspond to the component to be used if this unit’s initial
settings do not meet your needs. Change the following
parameters to reassign the respective jacks and effectively
connect more components.
Once the inputs have been reassigned, you can select the
corresponding component by using INPUT menu and
VOLUME/SELECT on the front panel (or the input
selector buttons on the remote control).
INPUT menu > Input Assign >
OPTICAL INPUT 1
Choices: VCR, VIDEO1, DTV/CBL, DVD/CD
OPTICAL INPUT 2
Choices: VCR, VIDEO1, DTV/CBL, DVD/CD
COAXIAL INPUT 3
Choices: VCR, VIDEO1, DTV/CBL, DVD/CD
You cannot select a specific item more than once for the same
jack.
INPUT menu
MENU
SET MENU
AMP
then
BASIC menu
SOUND menu
INPUT menu Input Assign
Input Mode
Note
Input Assign OPTICAL INPUT 1
Input Mode OPTICAL INPUT 2
COAXIAL INPUT 3
01EN.00_RX-SL100RDS.book Page 43 Thursday, November 27, 2003 12:42 PM