Filter
Top Products
37
English
ADVANCED OPERATIONS
ADVANCED
OPERATION
You can use the test tone feature to manually balance your
speaker levels. Please note that this operation will override
the level adjustments made in the Speaker Level section of
BASIC setup (page 17). Use the test tone to set speaker
levels so that the volume from each speaker is identical
when heard from your listening position.
1 Press TEST on the remote
control.
The unit will output a test tone.
2 Press k/n repeatedly on the remote control
to select the speaker you want to adjust.
TEST LEFT Front left speaker
TEST CENTER Center speaker
TEST RIGHT Front right speaker
TEST R SUR. Surround right speaker
TEST SUR. BACK Surround back speaker
TEST L SUR. Surround left speaker
TEST SUBWOOFER Subwoofer
3 Press l / h to adjust speaker volumes.
4 Press TEST when you have completed your
adjustment.
The test tone stops.
You cannot enter test mode if headphones are connected to the
PHONES jack. Remove the headphones from the PHONES jack.
Using the test tone
Note
b
TITLE
LEVEL
ENTER
CH
–
CH
+
p
MUTE
TV VOL VOLUME
AMP
VCRDVD/CD VIDEO 1
TUNERDTV/CBL VIDEO 2
a
MUTE INPUT
–
CH
TV MODE
+
RX-SL100RDS
MENU
SET MENU
RETURN
TEST
DISPLAY
1,4
2,3
RETURN
TEST
01EN.00_RX-SL100RDS.book Page 37 Thursday, November 27, 2003 12:42 PM