Filter
Top Products
ADVANCED OPERATIONS
32
Use this feature to automatically set this unit in the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source.
■ Setting the sleep timer
1 Select a source and start playback on the
source component.
2 Press SLEEP repeatedly on the
remote control to set the
amount of time.
Each time you press SLEEP, the front
panel display changes as shown
below. The SLEEP indicator flashes while switching
the amount of time for the sleep timer.
The “SLEEP” indicator lights up on the front panel
display after the sleep timer has been set.
■ Canceling the sleep timer
Press SLEEP repeatedly on the remote control until
“SLEEP OFF” appears on the front panel display.
After a few seconds, “SLEEP OFF” disappears, and the
“SLEEP” indicator goes off.
y
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or STANDBY/ON on the front
panel) to set this unit to the standby mode.
If you connected a surround back speaker, use this feature
to enjoy 6.1-channel playback for multi-channel sources
using the Dolby Digital Pro Logic IIx, Dolby Digital
Surround EX or DTS-ES decoders.
Press EX/ES on the remote control to switch
between 5.1- and 6.1-channel playback.
To select a decoder, press l / h repeatedly
when PLIIx Music (etc.) is displayed.
AUTO
When a signal (flag) that can be recognized by the unit is
input, the unit selects the optimum decoder for playing
back the signal in 6.1 channels. If the unit cannot
recognize the flag or no flag is present in the input signal,
it cannot automatically be played in 6.1 channels.
Decoders (select with l / h)
You can select from the following modes depending on the
format of the software you are playing.
PLIIx Music
For playing back Dolby Digital or DTS signals in 6.1
channels using the Pro Logic IIx decoder.
EX/ES
For playing back Dolby Digital signals in 6.1
channels using the Dolby Digital Surround EX
decoder.
DTS signals are played back in 6.1 channels using
the DTS-ES decoder.
OFF
For playing back Dolby Digital or DTS signals in 5.1
channels.
ADVANCED OPERATIONS
Using the sleep timer
1
HALL
2
JAZZ
3
ROCK
4
ENTERTAIN
SLEEP
STANDBY/ON
5
MUSIC
6
TV THTR
7
MOVIE 1
8
MOVIE 2
9
TV AV
q
/DTS
0
NIGHT
+10
EX/ES
ENT
STEREO
EFFECT
2
SLEEP
SLEEP 120min. SLEEP 90min.
SLEEP 60min.SLEEP 30min.SLEEP OFF
VCR
TUNED
VOLUME
SLEEP
L
L R
VIDEO 1 VIDEO 2
DTV/CBL
TUNER
DVD/CD
Lights
SLEEP
Enjoying multi-channel software
AUTO
EX/ES
PLIIx Music
OFF
+10
EX/ES
Decoder
(select with l / h)
01EN.00_RX-SL100RDS.book Page 32 Thursday, November 27, 2003 12:42 PM