Filter
Top Products
Advanced uses (3) – Utility functions – 35
ProR3 Digital Reverberator
Transmitting a MIDI bulk dump
The ProR3 allows you to transmit any type of data as a bulk dump; memory, program memory
(all programs or a specified program), banks, user ER, or system memory.
1. Repeatedly press the UTILITY key until the MIDI Bulk Out page appears.
2. Use the CURSOR keys (√) (®) to select a parameter.
3. Press the INC or DEC key to select the value.
4. Press the RECALL/ENTER key to execute the bulk dump.
Before you begin transmission, make sure that the MIDI device to which the ProR3 is connected
is ready to receive a bulk dump.
Assigning MIDI controllers
Here’s how to assign MIDI control numbers to the two controllers. The ProR3 can respond to two
controllers, and a separate page is provided to make settings for each controller.
1. Repeatedly press the UTILITY key until one of the controller assign pages appears.
2. Press the INC or DEC key to specify the control number.
The parameter selected in “Setting MIDI control parameters” of page 16 can be controlled in real-
time by receiving the specified control change message.
All All data (Program, Bank, UserER, System)
Program
U01–U90,
All
The data of the specified USER program.
If All is selected, data for all USER programs.
Bank
A–D,
All
The data of the specified Bank program change table.
If All is selected, data for all Bank data.
UserER
A–D,
All
The specified User ER data
If All is selected, all User ER data.
System System data settings made for utility functions such as Input Mode, etc.
MIDI Bulk Out
All Press ENTER
Controller-1 Assign
OFF