Filter
Top Products
Advanced uses (2) – Editing functions – 21
ProR3 Digital Reverberator
Reverb + Echo (Rev + Ech)
Key Parameter Value Description
MAIN
REV RevTime 0.3 ~ 99.0 s
Refer to “Reverberation” items on page 18
REV IniDelay 0.1 ~ 200.0 ms
REV HighRatio X0.1 ~ X1.0
REV LowRatio X0.1 ~ X2.4
REV Diffusion 0 ~ 10
ECHO Lch Delay 0.1 ~ 400.0 ms Left channel delay time
ECHO Rch Delay 0.1 ~ 400.0 ms Right channel delay time
ECHO Lch FeedBack –99 ~ +99% Left channel feedback amount
ECHO Rch FeedBack –99 ~ +99% Right channel feedback amount
ECHO High Ratio 0.1 ~ 1.0 High range feedback amount
FINE
ECHO/REV Balance *1
*1 Only when REV Patch is parallel (Reverb + Echo)
0/100 ~ 100/0 Level balance of echo and reverb
REV Rev Mix *2
*2 Only when REV Patch is serial (Reverb → Echo, Echo → Reverb)
0 ~ 100% Reverb amount
REV Reverb Type *3
*3 Hall, Room, Vocal, Plate
Type of reverb tone
REV Density 0 ~ 100 Density of reverb
REV HPF Thru, 40 Hz ~ 1.0 kHz Cutoff frequency of reverb high pass filter
REV LPF 400 Hz ~ 20 kHz, Thru Cutoff frequency of reverb low pass filter
REV Space Mod 0 ~ 10 Modulation level of reverb
ECHO Lch IniDelay 0.1 ~ 400.0 ms Time until the L channel echo appears
ECHO Rch IniDelay 0.1 ~ 400.0 ms Time until the R channel echo appears
REV Patch *4
*4 Reverb + Echo, Echo → Reverb, Reverb → Echo
Connection of reverb and echo
Common parameters Refer to “Common parameters” on page 27