XM Satellite Radio R-672 Stereo Receiver User Manual


 
7
Relationship between the video input signal and the video output signal
*1 : Component video signal can be output from the MONITOR COMPONENT OUT jacks only.
*2 : The video signal set in the VIDEO MODE menu can be output from all the types of MONITOR OUT jacks.
Video input signals Video Mode MONITOR OUTs
COMPONENT S-VIDEO (composite) VIDEO Setting COMPONENT S-VIDEO (composite) VIDEO
“AT”(Auto) Component S-Video Composite video
“CPN”(Component)
*1
Component
“SVD”(S-Video)
*2
S-Video S-Video S-Video
“CPS”(Composite)
*2
Composite video Composite video Composite video
“AT”(Auto) Component S-Video S-Video
“AT”(Auto) Component Composite video Composite video
“AT”(Auto) Component
“AT”(Auto) S-Video S-Video Composite video
“AT”(Auto) S-Video S-Video S-Video
“AT”(Auto) Composite video Composite video Composite video
• There are three types of video jacks(COMPONENT, S-VIDEO, (composite) VIDEO) for connecting video components.
Connect them to the corresponding video jacks according to their capability.
• For your reference, the excellence in picture quality is as follows : "COMPONENT” > "S-VIDEO” > "(composite) VIDEO”.
• When making COMPONENT VIDEO connections, connect "Y" to "Y", "PB/CB" to "CB" (or "B-Y", "PB") and "PR/CR" to "CR" (or
"R-Y", "P
R" ).
• When recording video program sources through VIDEO 1 OUT jacks, you must use the same type of video jacks that you did
connect to video playback components such as DVD player, LD player, etc.
• This unit is equipped with a function that up-converts composite video or S-Video signals to component video signals or
down-converts S-Video signals to composite video signals and outputs them from the MONITOR OUTs. Because of this, you
need not connect all the types of MONITOR OUT jacks to the MONITOR TV.
• After connecting the video components, you should set the video mode correctly, referring to the following table.
(For details, refer to "When selecting the VIDEO MODE" on page 40.)
Continued
• The TAPE IN/OUT jacks can be connected to audio recording equipment such as a tape deck, an MD recorder, etc.
3. CONNECTING AUDIO COMPONENTS
ENGLISH