Filter
Top Products
ENGLISH
• Auto presetting function automatically searches for FM
stations only and store them in the memory.
• While listening to radio broadcasts, press and hold
down the (MEMORY/)ENTER button for more than 2
seconds.
• Then "AUTO MEM" flickers and this receiver starts auto
presetting.
• Up to 30 FM stations can be stored.
Notes:
• FM stations of weak strength cannot be memorized.
• To memorize AM stations or weak stations, preform
"Manual presetting" procedure with using "Manual
tuning" operation.
• In the XM mode, auto presetting doesn't work.
26
• Each time this button is pressed, the band changes as
follows:
FM ST FM MONO AM XM
("ST" lights up) ("ST" goes off)
• When FM stereo broadcasts are poor because of weak
broadcast signals, select the FM mono mode to reduce
the noise, then FM broadcasts are reproduced in
monaural sound.
• To listen to XM Satellite Radio, select XM mode.
(For details, refer to "XM Satellite Radio (only for
North America)" on page 28.)
Auto tuning
1. Select the desired band. 2. Press the TUNING UP(+)/DOWN(-) buttons or the
SELECT UP( ) / DOWN( ) buttons for more than
0.5 second.
• The tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and "TUNED".
• If the station found is not the desired one, simply repeat
this operation.
• Weak stations are skipped during auto tuning.
• Manual tuning is useful when you already know the
frequency of the desired station.
• After selecting the desired band, press the TUNING UP(+)
/ DOWN(-) buttons or the SELECT UP( ) / DOWN( )
buttons repeatedly until the right frequency has been
reached.
Manual tuning Auto presetting
LISTENING TO RADIO BROADCASTS