Filter
Top Products
49
1. After performing the steps 1~3 in "Adjusting the current channel level" procedure on page 48, press the ENTER button.
2. Press the CURSOR LEFT( )/RIGHT( ) buttons to select the desired preset memory, then press the ENTER button.
Continued
Memorizing the adjusted channel levels
• You can memorize the adjusted channel levels into preset memory("REF 1", "REF 2") and recall the memorized whenever
you want.
• The “1” of "REF 1" indication flickers.
• Each time the CURSOR LEFT(
)/RIGHT( ) buttons are
pressed, "REF 1" or "REF 2" is selected.
• The adjusted channel levels have now been memorized
into the selected memory.
1. Press the CURSOR UP( )/DOWN( ) buttons to select the “MODE~”.
2. Press the CURSOR LEFT( )/ RIGHT( ) buttons to select the desired one of REF 1 and REF 2.
• "CAL" may be displayed instead of "REF 1" or "REF 2".
• Then the channel levels memorized into the selected
preset memory are recalled.
Recalling the memorized channel levels
ENGLISH