Filter
Top Products
ENGLISH
20
ENJOYING SURROUND SOUND
• Each time this button is pressed, the mode changes as follows :
Auto surround mode : The optimum surround mode will be automatically
selected depending on the signal format being input.
Manual surround mode : You can select the desired of different surround
modes selectable for the signal being input with
using the MULTI CONTROL knob or the
SURROUND MODE UP/DOWN (>/<) buttons.
• Depending on surround speaker setting, some surround modes can be selected or not as follows:
< >: Possible only when surround back speaker is not set to "N"(None).
[ ] : Possible only when surround back speaker is set to "N"(None).
( ): Possible only when surround back speaker is set to " 2c"(2ch).
{ }: Possible only when surround back speaker is not set to "N”(None) while playing the digital signals from DTS 5.1 channel sources
only(, not DTS 96/24 sources).
Notes :
• When the SPEAKER button is set to off, the auto surround mode is invalid.
• Even when the auto surround mode is selected and the same type of digital signal format is being input, the optimum
surround mode may vary depending on whether the speaker type is set to "N”(None) or not.
• When the auto surround mode is selected and the PCM (2 channel) digital signal or the analog stereo signal is being
input, only the stereo mode will be selected.
• When the auto surround mode is selected, the surround modes other than the optimum surround mode cannot be
selected.
Notes:
• Before surround playback, first perform the speaker setup procedure, etc. on the SETUP menu for optimum performance.
(For details, refer to "SETTING THE SPEAKER SETUP" on page 41.)
• When the EXTERNAL IN is selected as an input source, the surround modes cannot be selected.
Depending on how to select a surround mode, select the auto surround mode or the manual surround mode.
("AUTO" indicator lights up)
(“AUTO” indicator goes off)
When selecting the manual surround mode with pressing the SURROUND MODE button on the
front panel.
Select the desired surround mode.
• Each time the MULTI CONTROL knob is rotated or the
SURROUND MODE UP / DOWN (>/<) buttons are pressed,
the surround mode changes depending on the input signal
format as follows :
Signal format being input Selectable surround mode
Dolby Digital EX6.1 channel sources, (DOLBY D + PLIIx MOVIE), < DOLBY D + PLIIx MUSIC, DOLBY DIGITAL EX>,
Dolby Digital 5.1 channel sources DOLBY DIGITAL, DOLBY VS REF, DOLBY VS WIDE
Dolby Digital 2 channel sources <DOLBY PLIIx MOVIE, DOLBY PLIIx MUSIC>, [DOLBY PLII MOVIE, DOLBY PLII MUSIC],
DOLBY PRO LOGIC, DOLBY VS REF, DOLBY VS WIDE
DTS sources corresponding DTS mode, DOLBY VS REF, DOLBY VS WIDE, {DTS + NEO:6}
96 kHz PCM (2channel) sources <DOLBY PLIIx MOVIE, DOLBY PLIIx MUSIC>, [DOLBY PLII MOVIE, DOLBY PLII MUSIC],
DOLBY PRO LOGIC, NEO:6 CINEMA, NEO:6 MUSIC, THEATER, HALL, STADIUM
PCM (2channel) sources, <DOLBY PLIIx MOVIE, DOLBY PLIIx MUSIC>, [DOLBY PLII MOVIE, DOLBY PLII MUSIC],
Analog stereo sources DOLBY PRO LOGIC, DOLBY VS REF, DOLBY VS WIDE, NEO:6 CINEMA, NEO:6 MUSIC,
THEATER, HALL, STADIUM