Filter
Top Products
Page: 28 Model MX88
© 2011 Xantech Corporation
PLANNING THE SYSTEM
Before attempting any programming, plan the system configuration first. This should include the following:
1. Determine the brand and type of all source components to be used.
Source 1: ________________________
IR File Name: _____________ IR Library Palette
Source 5: ________________________
IR File Name: _____________ IR Library Palette
Source 2: ________________________
IR File Name: _____________ IR Library Palette
Source 6: ________________________
IR File Name: _____________ IR Library Palette
Source 3: ________________________
IR File Name: _____________ IR Library Palette
Source 7: ________________________
IR File Name: _____________ IR Library Palette
Source 4: ________________________
IR File Name: _____________ IR Library Palette
Source 8: ________________________
IR File Name: _____________ IR Library Palette
Zone Audio Source 1: ______________
IR File Name: _____________ IR Library Palette
Zone Audio Source 5: ______________
IR File Name: _____________ IR Library Palette
Zone Audio Source 2: ______________
IR File Name: _____________ IR Library Palette
Zone Audio Source 6: ______________
IR File Name: _____________ IR Library Palette
Zone Audio Source 3: ______________
IR File Name: _____________ IR Library Palette
Zone Audio Source 7: ______________
IR File Name: _____________ IR Library Palette
Zone Audio Source 4: ______________
IR File Name: _____________ IR Library Palette
Zone Audio Source 8: ______________
IR File Name: _____________ IR Library Palette
CAUTION: See caution card (included) for the latest information regarding code compatibility before
finalizing the system as there may be some IR code incompatibilities.
2. Determine the components to be used in each zone. Some sources may not be available in all zones.
3. Perform the Out-of Box PRE TEST as outlined in Section 2.
4. Assemble the components into a working MX88 system such as that shown in Figure 6 or 7.
5. Decide whether the MX88 System will be programmed using QuickConfig or Universal Dragon
QuickConfig Universal Dragon
6. If using Universal Dragon:
Program the MX88 System using the latest version of the Universal Dragon, available at
http://www.xantech.com/Downloads/Software/
Transfer the System Project to the MX88 Controller(s)
7. Confirm all functions in all zones.