Filter
Top Products
4
.
www.velodyne.com
Digital Drive User’s Manual
Remote Control Buttons
A brief description of each button on the remote control follows:
• PWR – Causes the SMS-1 to stand by.
• NUMERIC KEYPAD – Used to enter an
unlock code to enter SETUP mode, and for
other functions.
• SET (+/-) – Increases or decreases the Q value
for a parametric EQ, or sets values on the
SYSTEM SETTINGS page.
• LIGHT – Turns the SMS-1’s LCD light on or off.
• NIGHT – Limits the peak output of the SMS-1,
and illuminates the NIGHT indicator on the
LCD screen.
• VOL (+/-) – Raises or lowers the volume of
your SMS
-1 as indicated on the LCD display.
• MUTE – Mutes and unmutes the SMS-1.
• TEST – Used to toggle between the SYSTEM
SETTINGS scr
een and the SYSTEM RESPONSE
scr
een during setup.
• EXIT – To exit SETUP mode. The unit will ask
if you want to save settings before exiting.
• SELECT - To toggle field values.
• RESET – Used to reset volume to the last saved
setting on the main screen, and to defeat
crossovers on the settings screen.
• MENU – Enters SETUP mode from the
intr
oductor
y screen.
• PRESETS – To access the five presets and one
EQ defeat listening modes. Initially set at the
factor
y, they are fully user adjustable. The
front panel LCD indicates which preset you
have selected.
Figure 1: Velodyne Digital Drive remote control