Filter
Top Products
Velodyne Digital Drive User’s Manual Page 1
Congratulations!
Congratulations on your purchase of a Velodyne Digital Drive subwoofer system! Digital Drive
technology is the result of years of research and development, combining advanced Digital Signal
Processing (DSP), software, equalizer, audio filter, digital amplifier, digital servo control, and high-
pressure loudspeaker technologies. The result is new, state-of-the-art in subwoofer design that takes
our traditionally accurate low-frequency sound reproduction to new levels of precision, eliminates
room anomalies, and resolves many tradeoffs that encumber lesser subwoofer designs.
This exceptional subwoofer will provide you with years of unparalleled listening pleasure. Enjoy!
Caution!
Please observe the following instructions to insure safe and proper system operation.
Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid electrical
shock, do not open speaker enclosure or amplifier chassis cover. Please observe all warnings on the
equipment itself. There are no user serviceable parts inside. Please refer all service questions to your
authorized Velodyne dealer.
Prior to Installation
Please unpack the system carefully! This unit is heavy. Use caution when lifting or moving to avoid
injury. Remove all staples used to seal the carton as they can scratch the cabinet. Please save the
carton and all packaging materials for future use. Packing this unit in any other carton may result in
severe damage when shipping. Please take a moment to record the serial number and date/location
of purchase in the space provided on the warranty card for future reference or register on-line at
www.velodyne.com.
Caution!
This subwoofer has electronics built into the cabinet. Do not place the cabinet next to sources
of heat such as furnace registers, radiators, etc. Do not place the unit near sources of excessive
moisture, such as evaporative coolers, humidifiers, etc. The power cord should be routed in
such a way that it will not be walked on, pinched, or compressed in any way that could result
in damaging the insulation or wire.
Regardless of where you install your Velodyne subwoofer, it must remain in an upright position (woofer
facing forward). Using, shipping, or otherwise storing the subwoofer in any other position for an
extended period of time may result in damage to the unit not covered by warranty.
Certain types of televisions are particularly sensitive to stray magnetic fields. If your television produces
distorted colors after installing your subwoofer, simply increase the distance between your television
and the subwoofer, until normal color and operation is returned.
Important Note: Turn your subwoofer off before moving it!