Filter
Top Products
30
English
UDB275MP
Notes:
Specifications comply with JEITA Standards.
Specifications and design are subject to change
without notice for further improvement.
Please make sure when connecting external power
amplifier, that you properly, to the car chassis,
ground the amplifier.
If this is not done, severe damage to the source
unit may happen.
General
Power Supply Voltage:
14.4 V DC
(
10.8 V to 15.6 V allowable
)
, nega-
tive ground
Current Consumption: Less than 15 A
Speaker Impedance: 4 Ω
(
4 Ω to 8 Ω allowable
)
Weight: 2.42 lb.
(
1.7 kg
)
Dimensions:
178 mm Width X 100 mm Height X 156 mm
Depth
Specifications
Audio
Maximum Power Output: 200 W
(
50 W X 4 ch
)
Power Output: 4 X 19 W
(
DIN 45324,
+
B
=
14.4 V
)
Bass Control Action
(
100 Hz
)
: ±14 dB
Treble Control Action
(
10 kHz
)
: ±14 dB
Line Output
(
with A/C 1 kHz, 10 k
Ω
)
: 1.8 V
Power Output:
19 W RMS x 4 Channels at 4 Ω and ≤ 1%
THD+N
Signal to Noise Ratio:
86 dB
(
reference: 1 W into 4Ω
)