24
English
UDB275MP
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
∗ The factory default setting is “MID”.
2-1. Select “AUX SENS”.
3-1. Turn the
[
ROTARY
]
knob to select “
LOW”,
“MID” or “HIGH”.
Note:
This adjustment only affects music playing via
[
AUX
]
input. Telephone interrupt will be using “MID”
as default.
RIGHT
Telephone calls can be heard on the front right
speaker connected to this unit.
Setting the car speaker output for the
cellular phone
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set the cellular phone
interrupt to ON.
2-1. Select “TEL-SP”.
3-1. Turn the
[
ROTARY
]
knob to select “
RIGHT”,
or “LEFT”.
LEFT
Telephone calls can be heard on the front left
speaker connected to this unit.
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold unit, you can listen to your
telephone calls on your car speakers.
∗ The factory default setting is “OFF”.
2-1. Select “TEL-SW”.
3-1. Turn the
[
ROTARY
]
knob to select the set
-
ting.
Each time you turn the
[
ROTARY
]
knob, the
setting changes in the following order:
OFF ON MUTE
Operations Common to Each Mode
OFF:
This unit continues normal operation even when
the cellular phone is used.
ON:
You can listen to your telephone calls from the
speakers connected to this unit.
MUTE:
The sound from this unit is muted during tele-
phone calls.
Notes:
When the “TEL-SW” is set to “ON” or “MUTE” and
telephone is connected, system will automatically
power ON (Initially power OFF). When telephone
is disconnected, system will return to power OFF.
This unit requires hands-free kit that supports
[
AUX
]
input as a cellular phone audio input. Please con
-
sult your local authorized Clarion dealer for more
information on the handsfree kit offered.
If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio through
the system.
When listening to your calls on your car speak
-
ers, you can adjust the volume by turning the
[
ROTARY
]
knob, it will be memorized as new tele
-
phone volume.
The factory default setting for this volume is
“19”.
This unit requires special wiring to mute the audio
signal automatically when a cellular telephone rings
in the car.
This function is not compatible with all cellular
telephones. Please contact your local authorized
Clarion dealer for information on proper installation
and compatibility.
Setting the button and screen
illumination
Press the
[
COLOR
]
button to select a color type.
Each time you press the
[
COLOR
]
button, the
type changes in the following orders:
COLOR-SCAN INDIGO-BLUE
SURF-BLUE SILKY-WHITE
AQUA-GREEN FRESH-GREEN
LEAF-GREEN WARM-AMBER
PASSION-RED VIVID-PINK
PALE-PINK DARK-VIOLET
PURE-PURPLE U-COLOR1
U-COLOR2 U-COLOR3 COLOR-SCAN...