Univex UDB275MP CD Player User Manual


 
19
English
UDB275MP
USB Operations
Decode Format
Sampling rate
(
kHz
)
Bit-rate
(
kbps
)
MP3
MPEG 1, 2 and 2.5 - Layer 3
MPEG-1 : 32, 44.1, 48
MPEG-2 : 16, 22.05, 24
MPEG-2.5 : 8,12
MPEG-1 : 32 - 320
MPEG-2 : 8 - 160
MPEG-2.5 : 8 - 160
VBR
WMA
8, 16, 22.05, 32, 44.1
48, 64, 80, 96, 128, 160, 192
Sampling rate
(
kHz
)
Bit-rate
(
kbps
)
Precautions when creating MP3/WMA on
USB memory device
Usable sampling rates and bit rates:
Hot plugging function
This unit has the ability to recognize the changes
of connecting and disconnecting an USB mem-
ory device.
When the unit is powered on, this function allows
you to start playing the tracks automatically when
the USB memory device is inserted.
Connecting a USB memory device
1. Open the USB cover at the USB port.
2. Connect the USB memory device into the
port with the correct direction. The indica-
tor will lit
on. or indicator will lit on
according to the audio format of the current
track.
Playback will begin from the first track on the
USB memory device.
Always insert the USB memory device fully into
the port. Incomplete connections may cause the
USB memory device not be recognized.
Depending on the number of tracks recorded,
some amount of time may be required until all
tracks are read into the unit.
USB memory devices may have different shape
depends on brands. Some USB memory de
-
vices may not be able to plug into the port due
to the shape design. Please use an extension
cable instead.
Please reconnect the USB memory device
when it cannot be detected properly.
Note:
Do not forcibly connect the USB memory device to
the port with incorrect direction as this will damage
the USB memory device as well as the USB port.
Unplug the USB memory device
Remove the USB memory device from the port
during USB mode, the unit will revert to Radio
mode automatically.
Alternatively, user can remove USB memory de
-
vice at any mode. It is safe to remove USB memory
device during track playing.
Listening to a track with USB
memory device already connect to
the unit
Press the
[
SRC
]
button to select the USB mode.
When the unit enters the USB mode, track will
start to play automatically.
If there is no USB memory device inserted, USB
mode will not be shown for selection.
The mode changes each time the
[
SRC
]
button is
pressed.
Radio CD
(
USB
)
AUX Radio...