Filter
Top Products
23
English
UDB275MP
LED OFF:
To turn off message knob indication.
Message knob
indication in power saving mode.
Operations Common to Each Mode
Adjustment Mode
1. Press the
[
ADJ
]
button to switch to the adjust
-
ment selection display.
2. Press the
[
,
]
button to select the “
Item
name”.
“CLOCK(E)” “KNOB LED”
“
SCRN SVR” “A-SCROLL”
“
AUX SENS” “TEL-SP” “TEL-SW”
3. Turn the
[
ROTARY
]
knob to select the
“Desired setting value”.
∗ After completing settings, press the
[
ADJ
]
button to return to the previous mode.
Setting the clock
2-1. Select “CLOCK
(
E
)
”.
3-1. Press the
[
]
button.
3-2. Press the
[
,
]
button to select the hour
or the minute.
3-3. Turn the
[
ROTARY
]
knob to set the correct
time.
∗ The clock is displayed in 12-hour format.
3-4. Press the
[
]
button to store the time into
memory.
Note:
You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the car’s
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.
ON:
To scroll automatically.
OFF:
To scroll just 1 time when the title was changed
or the
[
TITLE
]
button was pressed for 1 second
or longer.
Turning the screen saver function on or
off
This unit is provided with the screen saver function
which allows you to show various kinds of patterns
in a random order in the operation status indication
area of the display. You can turn on and off this
function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗ The factory default setting is “ON”.
2-1. Select “SCRN SVR”.
3-1. Turn the
[
ROTARY
]
knob to select “SS ON”
or “SS OFF”.
SS ON:
Screen saver is enabled.
SS OFF:
Screen saver is disabled.
Setting the message knob indication
User can turn on or off the message knob indication.
∗ The factory default setting is “ON”.
2-1. Select “KNOB LED”.
3-1. Turn the
[
ROTARY
]
knob to select “
ON” or
“OFF”.
LED ON:
To turn on message knob indication. Message knob
indication is display all the time.
Setting the method for title scroll
Set how to scroll in MP3/WMA title.
∗ The factory default setting is “ON”.
2-1. Select “A-SCROLL”.
3-1. Turn the
[
ROTARY
]
knob to select “
ON” or
“OFF”.