Filter
Top Products
12
TABLE OF CONTENTS
FOR YOUR SAFETY 12
Important Information 12
COMPONENTS 13
SETTING TO WORK 13
Rotation mode 13
Pointing mode 13
Line/scanning mode 14
Self-leveling and Height Change alert 14
LEVELING ACCURACY 14
Influences on Leveling Accuracy 14
Accuracy Check 14
OPERATING EXAMPLES 15
Marking Heights 15
Adjusting in Parallel 16
Right Angles/Vertical Mode 16
Transferring marks to the Ceiling - Plumb Point 16
POWER SUPPLY 17
Installing Batteries 17
Operating Time 17
Charging 17
PROTECTING THE UNIT 17
CLEANING AND MAINTENANCE 17
PROTECTING THE ENVIRONMENT 17
WARRANTY 18
TECHNICAL DATA 18
FOR YOUR SAFETY
• Do not remove warning labels from the unit.
• The laser is subject to class 3R (< 5mW, 600 ... 680 nm).
• Never look into the laser beam or direct it to the eyes of other people.
• Always operate the unit in a way that prevents the beam from getting into people's eyes.
Important Information
• Always mark in the center of the laser beam
• Always place the laser in the middle of the working area
• Tripod/wallmount operation is recommended for distances over 65 feet (20 m)
• Check the accuracy regularly
• Stable mounting is necessary for secure operations
• Keep the glass of the instrument clean
GB
LASER RADIATION
AVOID DIRECT EYE
EXPOSURE
CLASS 3R LASER PRODUCT
031266_02_apollo_eng_12-18.p65 29.08.2003, 10:29 Uhr12