Filter
Top Products
WARRANTY
According to legal regulations, the warranty-period for this unit is 12 months for material and manufacturing
defaults.
We do not take any liability for damages caused by a non-accurate unit.
Before starting to work, always carry out the Accuracy Check according to the corresponding chapter.
This warranty is no longer valid if the unit is opened or the labels are removed.
TECHNICAL DATA
Leveling accuracy
1,3
: ≤ ± 1 mm/10m, 1/8" @ 100 ft, 20 arc seconds
Rotation: 4 speed levels
appr. 10/80/200/600 rpm
Operational area
1,2
: appr. 100 m (330 feet) radius with detector
Laser type: red diode laser 635 nm
Laser class: Class 3R, <5mW
Self-leveling range: appr. ± 5°
Leveling time: appr. 30 sec
Leveling indicators: LED flashes
Laser beam diameter
1
: appr. 5 mm
Power supply: 4 x 1.5V Mono cells type D (LR20)
Operating temp.: 23°F...113°F (-5°C ... 45°C)
Storage temp.: -4°F...158°F (-20°C ... 70°C)
Tripod attachments: 5/8 x 11 horizontally and vertically
Weight: 2.7 kg (5.9 lbs)
Low voltage indication: flashing/shining of the battery indicator
Low voltage disconnection: unit shuts off
1) at 21° Celsius
2) under optimal atmospheric circumstances
3) along the axis
DECLARATION OF CONFORMITY
We
Trimble Kaiserslautern GmbH declare under our sole responsibility that the product HV301 to which this
declaration relates is in conformity with the following standards EN 61000-4-2, 1994; EN 55022, 1994; EN
61000-4-3, 1997 following the provisions of directive Electromagnetic compatibility 89/336/EEC.
The managing director
Electro-Magnetic Compatibility
Declaration of Conformity
This digital apparatus does not exceed the Class B Limits for radio noise for digital apparatus set out in the
Radio Interference Regulations of the Canadian Department of Communications.
This device complies with part 15 off the FCC rules. Operation is subject to the condition that this device does
not cause harmful interference.
Note: The product been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. The product generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio or television reception,
which can be determined by turning the product off and on. The user is encouraged to try to eliminate the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and the receiver.
• For more information, consult your dealer or an experieced radio/television technician.
Caution: Changes or modifications to the product that are not expressly approved by Trimble could void authority
to use the equipment.
031266_02_apollo_eng_12-18.p65 29.08.2003, 10:29 Uhr18