Filter
Top Products
GB
10 DVB C1
3.2 Using Other Functions
3.2.1 Controlling the Volume
Volume Control
Use the Vol Up/Down buttons on the remote control to control the volume. When the volume control display appears,
you can also use the Left/Right buttons to adjust the volume. After the volume is adjusted, the volume control display
will automatically disappear.
Muting
Press the Mute button on the remote control to turn off the sound temporarily. Press the Mute button again to restore
the sound.
3.2.2 Audio Setup
Audio Setup is divided into Audio Language setting and Audio Mode setting.
1 Press the Audio button on the remote control.
2 At the Audio Language setting (above), use the Left/Right buttons to select one of the languages offered by the
relevant channel.
3 Use the CH Up/Down buttons to select the Audio Mode setting (below).
4 Use the Left/Right buttons to select the desired audio mode. The available modes are as follows:
z
Stereo: The sound comes from both speakers.
z
Mono(L): The sound comes from the left speaker only.
z
Mono(R): The sound comes from the right speaker only.
z
AC-3: Dolby Digital (To listen to Dolby Digital, connect an amplifier that supports Dolby Digital decoding to the
Digital Audio output.)
5 To return to normal screen, press the Exit / Audio button on the remote control.
3.2.3 Listening to the Radio
The STB also allows you to listen to radio stations.
1 To listen to the radio, press the Radio button on the remote control.
2 When the Channel List screen appears, use the Radio button to
select the TV/radio channel and then press the OK button.
Use the Numeric buttons to select the desired radio channel.
Alternatively, use the CH Up/Down buttons to select a radio channel,
and then press the OK button.