Toshiba SD-V594SC Speaker System User Manual


 
67
Function setup (DVD)
Parental : Off
Set Password
Output : Interlace
DivX(R) VOD
Menu : English
Subtitle : English
Audio : English
E.B.L. : Off
TV Screen : 4:3
Display : On
Picture Mode : Auto
JPEG Interval : 5 Seconds
Screen Saver : On
DRC : Off
QSound : Off
Digital out : PCM
QSound
This DVD video player equipped with a “QSound”. It can
produce the effect of being in a cinema or a concert hall.
Off: The QSound is disengaged.
On: The QSound operates.
Off:
It plays back at the recording level on the disc.
On:
Loud sound such as explosion or similar is toned
down slightly when played back. This makes it
suitable for when it is connected to a stereo.
Notes:
This function works only during playback of Dolby Digital
recorded discs.
The level of Dynamic Range Reduction may differ
depending on DVD video disc.
DRC
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
Notes:
The QSound setting can also be changed with AUDIO
on the remote control .
This function works only when the disc recorded with
Dolby Digital is played back.
When this function works, the volume might changed.
When the voice is distorted, turn off QSound.
Digital Out
Selected the output sound format corresponding to your
system connection.
PCM:
Select when connected to a 2 channel digital
stereo amplifier.
Bitstream:
Disc audio bitstream data will be output.
Notes:
When you make a connection to a TV, or Dolby
Surround Pro Logic or stereo system via the analog
audio jacks, select “PCM” or “Bitstream”.
If apply HDMI connection to TV, make sure to select
“PCM”, audio signal passing to TV via HDMI cable.
2I40301A-En_p60-69 21/3/06, 9:46 AM67