Filter
Top Products
20
Connections
Connecting to a TV
Connect the DVD/VCR to your TV.
To VIDEO
OUT
To ANALOG AUDIO OUT
(red) (white)
(yellow)
Signal flow
To wall outlet
To video input
(yellow)
(red)
Audio/video cable (supplied)
To audio inputs
(white)
Notes:
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD/VCR to a Y cable adapter
(not supplied) and then connect to your TV.
• Connect the DVD/VCR directly to your TV. If you connect the DVD/VCR to a VCR, TV/VCR combination or video selector,
the playback picture may be distorted as DVD video discs are copy protected.
• While HDMI is being output in the DVD mode, it is impossible to output from the Video out jack, S-video out jack or
Component video out jacks.
TV or monitor with
audio/video inputs
Basic connection
Note: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you to
connect the S-video or ColorStream
®
component video outputs to your TV/monitor also.
• Make sure following setting.
On-screen display
Select:
Page
“Digital Out”
“PCM” or “Bitstream”
2I40301A-En_p18-27 21/3/06, 9:42 AM20