Filter
Top Products
33
Basic setup (VCR)
Repeat the step 1 on page . Then press SET +
or – to select the “ADD/DELETE” and press
ENTER.
1
To ADD/DELETE channels
Press VCR MENU until the menu screen is
cleared.
3
To Add or Delete channels
2
1) Press Direct channel selection buttons (0–9)
or SET +/– to select a channel number you want
to add or delete.
2) To add channels
Press ENTER until “ADD” appears on the screen.
To delete channels
Press ENTER until “DELETE” appears on the
screen. The channel number will blink.
3) Repeat step 1 and 2 to add or delete other
channel.
Noise elimination
When you don't want to receive a weak signal broadcast, a Blue
back screen can be obtained by selecting the NO NOISE BACK-
GROUND to “ON”. When the unit is shipped from the factory,
the NO NOISE BACKGROUND is set to “ON”.
Repeat the steps 1~2 on page and press
SET + or – to select “NO NOISE BACKGROUND”.
1
Press ENTER to select “ON” or “OFF” position.
2
〈
〉
Press VCR MENU until the menu screen is
cleared.
3
0–9
ENTER
VCR MENU
〈
〉
SET +/–
2I40301A-En_p28-33 21/3/06, 9:43 AM33