Filter
Top Products
55
Advanced playback (DVD)
Changing soundtrack language/
Setting surround sound
Changing soundtrack language
1
Press AUDIO during playback.
The current soundtrack language will
appear.
You can select the language when you play a multilingual disc.
In case of Video CD playback
Audio type changes as follows each time you press AUDIO.
DVD
VCD
1/2 Eng Dolby Digital
LR
L R
2
Notes:
• If the desired language is not heard after pressing the
button several times, the language is not recorded on
the disc.
• Changing soundtrack language is canceled when you
open the disc tray. The initial default language or available
language will be heard if the disc is played back again.
Press AUDIO repeatedly until the desired lan-
guage is selected.
• The on screen display will disappear after a few
seconds.
2/2 Fre Dolby Digital
Press B or A to select “On”.
• The on screen display will disappear after a few
seconds.
1
Setting surround sound
This DVD video player equipped with a “QSound”. It can produce the effect of being in a cinema or a concert hall.
2
To cancel Surround mode:
Follow the left steps 1~2, then press B or A to select the
“Off” position.
Notes:
• The QSound setting can also be changed in the function
setting .
• The “QSound” works only when the DVD disc recorded
with Dolby Digital is played back.
• When this function works, the volume might changed.
• When the voice is distorted, turn off QSound.
During disc playback press AUDIO.
Manufactured under license from QSound Labs,
Inc. U.S. patent Nos. 5,105,462, 5,208,860 and
5,440,638 and various foreign counterpart.
Copyright QSound Labs, Inc. 1998-2002.
QXpander
™
is a trademark of QSound Labs, Inc.
All rights reserved.
DVD
AUDIO
B/A
2I40301A-En_p52-59 21/3/06, 9:45 AM55