Filter
Top Products
90
11.4. Setting the Scene Memory to be Recalled at Power-On
SCENESETT IN
G
P–
O
N
SCENESETT IN
G
P–
O
N
P
O
W
ER
O
NLAST
P
O
W
ER
O
N01
SCENE
01 1
SCENE
–
01 1
SCENE
–
SCENESETT IN
G
LO
A
D
MEMORY
6
ENTER
3
ESC/BACK
5
MEMORY
MEMORY
1
PARAMETER
2
PARAMETER
4
or
Step 1. Hold down the Memory key.
The Scene memory setting screen is displayed.
Step 2. Use the Memory key or Parameter setting knob to
display "P-ON" indication.
Step 3. Press the Enter key to display the setting screen for the
Scene memory to be recalled at Power-On.
Step 4. Select with the Parameter setting knob the Scene
memory bank number (01 – 32) or LASTSCENE to be
read at power-on.
Notes
• When LASTSCENE is selected, the Scene memory
recalled last before power-off is automatically recalled
when power is turned on.
• To retain the set parameters, be sure to save them in
the Scene memory. Unless otherwise saved, all the
set parameters are abandoned when the AC power
supply is shut off.
Step 5. Press the Escape/Back key to perform setting that the
designated Scene memory bank number is read at
power-on.
Step 6. Press the Memory key.
The display returns to the normal use state.