Filter
Top Products
51
SP E
Q
= ALL FLAT
(B5) Speaker parameter presetting
Optimum equalization can be automatically set depending on the type of speaker to be used.
If this function is not used or the speaker to be used is not included in a speaker list, set "SP EQ" to ALL
FLAT. When the speaker type is selected from the speaker list, the number of bands that can be set on the
next EQ setting screen decreases by the number of bands to be used in the setting performed on this screen.
The number of bands to be used differs depending on the type of speaker.
To perform this setting, select the speaker model from the speaker list and press the Enter key to confirm.
ALL FLAT (default),
F-122, F-122SUBWFER (F-122 with a subwoofer),
H-1, H-1SUBWOOFER (H-1 with a subwoofer),
H-2, H-2SUBWOOFER (H-2 with a subwoofer),
H-3, H-3SUBWOOFER (H-3 with a subwoofer),
HB-1, FB-100, SW FOR F-122 (subwoofer for F-122),
SR-S4 SINGLE (SR-S4 driven by a single amplifier),
HX-5_E, HX-5_E LOCUT (HX-5_E for low-cut), FB-120
Setting Range
F-122 F-122SUBWFER*
1
GAIN (dB) FREQ (Hz) Q GAIN (dB) FREQ (Hz) Q
Settable EQ bands Settable EQ bands
in the EQ setting screen in the EQ setting screen
–
37.5 0.5
–
45 0.5
–
37.5 0.7
–
45 0.7
+11.5 85 2.871 +6.5 80 1.414
–2.5 212 0.667 –4.5 180 0.667
–8 900 2.871 –8 900 2.871
+8 10 k 0.267 +8 11.2 k 0.267
–
20 k 0.7
–
20 k 0.7
EQ 01
EQ 02
EQ 03
EQ 04 (HPF)
EQ 05 (HPF)
EQ 06
EQ 07
EQ 08
EQ 09
EQ 10 (LPF)
*
1
F-122 with a subwoofer
ALL FLAT (Default)
GAIN (dB) FREQ (Hz) Q
0 31.5 1.5
0 63 1.5
0 125 1.5
0 250 1.5
0 500 1.5
0 1 k 1.5
0 2 k 1.5
0 5 k 1.5
0 8 k 1.5
0 16 k 1.5
EQ 01
EQ 02
EQ 03
EQ 04
EQ 05
EQ 06
EQ 07
EQ 08
EQ 09
EQ 10
[Speaker EQ settings]