Filter
Top Products
35
9.5. Operation Example
The operation procedure is described here using an example to change the output parameters after recalling
the Scene memory when the output operation key is locked.
Step 1. Press the Memory key to display the Scene memory setting
screen.
Step 2. Press the Enter key to display the Scene memory recall
screen.
Step 3. Select with the Parameter setting knob the Scene memory
bank number to be recalled.
Step 4. Press the Enter key.
Step 5. Press the output channel selection key.
The password entry screen is displayed with the leftmost
character entry position flashing.
Step 6. Enter the password with the input channel selection keys.
The locked key is released when the entered password is
correct.
Step 7. Use the Up, Down, Left and Right shift keys to display the
desired setting screen.
Step 8. Change the parameter with the Parameter setting knob.
Step 9. Press the Escape/Back key twice.
The display returns to the Scene memory indication screen.
L
O
AD 01
05–LE
C
TURE
L
O
AD 05
ENTERPASS
W
O
R
D____
ENTERPASS
W
O
R
D
O
UT1–
O
UT
1O
N10
05–LECTURE
BASS+12 TREBLE–10
BASS+15 TREBLE–10
01 1
SCENE
–
SCENESETT ING LOAD
OUTPUT SEL
INPUT SELECT
2
INPUT SELECT
6
.
:
ESC/BACK
ENTER
PARAMETER
PARAMETER
Press twice.
MEMORY
ENTER
2
1
4
5
6
7
8
9
3