Filter
Top Products
86
(H5) Scene memory erasure (when ERASE is set)
ERASE 01
Erase the saved Scene memory.
Pressing the Enter key erases the Scene memory in the designated memory bank number.
To cancel erasure execution, press the Escape/Back key.
After erasure completion, the unit setting is restored to the factory default setting.
(H6) Scene memory bank number to be recalled at power-on (when P-ON is set)
P
O
W
ER
O
N LASTS EE
CN
Set either the Scene memory bank number to be automatically recalled at power-on, or "LASTSCENE."
When LASTSCENE is selected, the Scene memory recalled last before power-off is automatically recalled
when power is turned on. When the Scene memory bank number (one of 01 – 32) is selected, the Scene
memory saved there is automatically recalled when power is turned on.
Note
To retain the set parameters, be sure to save them in the Scene memory. Unless otherwise saved, all the set
parameters are abandoned when the AC power supply is shut off.
(H4) Scene memory name setting (when SAVE is set)
BANK01NA
M
E=_______
Give a name to the Scene memory.
The flashing portion is the cursor position for entering Scene memory name characters.
Select a character from the alphanumeric character list by rotating the Parameter setting knob, then move the
cursor with the Right shift key.
Entering a new name overwrites the existing name, if there is.
To delete the character, select " _ " (underscore) with the Parameter setting knob. A space character cannot
be entered.
Up to 7 characters can be used to set the name.
7 characters (default: _ _ _ _ _ _ _)
Setting Range
01 – 32 (default: 01)
Setting Range
LASTSCENE (default), 01 – 32Setting Range