Filter
Top Products
1. USER PRECAUTIONS
Avoid installing the unit near heaters, as well as locations exposed to direct sunlight as this may discolor or
deform the unit's exterior.
Avoid using the unit in humid or dusty locations. Also, do not block air exhaust vents located on the top and side
panels to prevent equipment failures. (BA-806/BA-823)
Keep beverages away from the unit as they may be spilt. Also, do not insert combustibles or metallic objects,
such as hairpins and needles, into the unit to prevent fires, electrical shocks and equipment failures.
To avoid severe electrical shocks and possible catastrophic damage, never open the unit nor touch its internal
components.
Always take hold of the plug to unplug it from the power outlet. Do not bend the power cord excessively nor place
any heavy equipment on the cord as the cable may be damaged, resulting in fires or electrical shock.
Unplug the power cord from the wall outlet if the unit is to be stored for two weeks or more.
Avoid installing the unit on the unstable table or in vibratory locations as this may damage the unit or badly
influence its operation.
Use a soft cloth to wipe off dust and grease from the front panel and case. When these parts are very dirty, dip
the soft cloth in a small amount of neutral detergent, remove the dirt and wipe with a dry cloth. Never use
thinner, benzine, alcohol, or other solvents, which may damage the unit's finish.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
— 4 —