Teac AD-800 Stereo System User Manual


 
35
ENGLISH
Timer-Controlled Playback (
)
The source for timer playback must be CD, TAPE or USB. Timer
playback does not work with an external device connected to the
LINE input.
1
Connect this unit and a stereo system to a commercially-
available audio timer (see previous page).
2
Set the power switch of all components to ON.
3
Prepare the source for timer playback.
When you set a cassette tape
FSet the REV MODE switch to the desired position. To make
both sides play continuously, set the REV MODE switch to
the Q position.
FSet the DOLBY NR switch. (page 9).
Playback always starts from “side A”.
4
Set the CD-TAPE-USB switch to the desired source for
timer playback.
5
Set the OFF-PLAY-REC switch to the PLAY position.
“TIMER” appears on the AD-800’s display.
6
Set the audio timer to your desired start (power on) and
stop (power off) times.
When this setting is completed, the power to all components
should be turned off.
At this time, do not press the AD-800 POWER button.
Leave the button pushed in (the on position). If the
POWER button is in the off position, timer playback will
not function.
When the preset start time is reached, power will be supplied
and playback will start automatically.
When you do not want to use the timer, set the OFF-PLAY-REC
switch to the OFF position.
Timer-Controlled Recording (
)
The timer recording source can only be an external device
connected to the LINE inputs. And the timer recording can only
record to cassette tape.
(Example: Recording a broadcast program)
1
Connect this unit and a stereo system to a commercially-
available audio timer (see previous page).
2
Set the power switches of all components to ON.
3
Prepare the cassette tape that you want to record to with
timer recording.
Recording always starts from “side A”.
To record on a single tape side, set the REV MODE switch to V.
To record on both tape sides, set the REV MODE switch to K
or Q.
Set the DOLBY NR switch (page 9).
If the erasure prevention tabs of the cassette tape have been
broken off, put pieces of adhesive tape over the hole(s).
You can record on Normal (type
) and Chrome (type ) tapes
with this unit.
Continued on the next page