Teac AD-800 Stereo System User Manual


 
11
ENGLISH
14
1516
16
EJECT (
-
)
When the tape is stopped, press this button to open the cassette
tape compartment.
17
Reverse/Forward play (
H
/
U
)
Press these buttons to start playback of the back/front side of a
tape.
Press during tape playback/recording standby to restart
playback/recording.
18
DOLBY NR switch
Use this switch to turn Dolby noise reduction on and off (pages 9
and 25).
19
PITCH CONTROL knob
Turn this knob to vary the playback speed (page 26).
20
REV (Reverse) MODE switch
Use this switch to select the reverse mode (page 24).
21
Pause (
+
)
Press this button to pause CD playback. To resume playback,
press this button again.
22
FOLDER (
/ )
Use these buttons to select folders (pages 19 and 28).
23
POWER ON START OFF-PLAY-REC (TAPE)
Use this switch to select the timer setting (play, record or off).
To use this when set to play or record, connect a commercially-
available audio timer to this unit (page 35).
24
Play (
U
)
Press this button to start CD playback.
25
Stop (
)
)
Press this button to stop CD playback.
26
Skip (
/
)/Search (
N
/
)
Press these buttons to skip through files.
Hold down these buttons to search for part of a file.
27
POWER ON START CD-TAPE-USB
Use this switch to set the sound source that is active when the
power is turned on.
Use this switch to set the media used for timer playback/
recording. (The timer recording can only record to cassette tape.)
To use timer playback/recording, connect a commercially-
available audio timer to this unit (page 35).
28
Pause (
+
)
Press this button to pause USB playback or recording.
Press this button again to resume playback or recording.
29
Play (
U
)
Press this button to start USB playback.
When in USB recording standby, press this to start recording.
30
Stop (
)
)
Press this button to stop USB playback.
Press this button also to stop recording to USB.
31
Disc tray
32
USB port
Connect an external USB storage device here.
33
POWER
Press this button to turn the unit on or off.
CAUTION
Never turn the unit off or disconnect a USB storage device
when it is being accessed, for example, during writing,
playback, recording or the erasure of files.
Doing so could damage the AD-800 and the connected
USB storage device.