TC electronic SDN BHD 48 Stereo System User Manual


  Open as PDF
of 72
 
DDiiggiittaall IInnppuuttss aanndd OOuuttppuuttss
Connector (S/PDIF):
Formats (S/PDIF and TosLink):
Connector (ADAT® or TosLink):
Format (ADAT®):
Connector (Word Clock IO):
FireWire (format):
FireWire (channels):
Digital IO Engine:
CClloocckk aanndd JJiitttteerr
Internal Sample Rates:
Internal Clock Precision:
External Sample Rates:
Jitter Rejection Engine:
Jitter Rejection Filter:
DIO Interface Jitter:
AD/DA Conversion Jitter:
Digital Output Phase
(stand alone and across network):
Input Slip Sample Tolerance (all DIs):
Processing Delay DIO @ 192/96/48 kHz:
Frequency Response DIO:
LLiinnee IInnppuuttss CChh.. 55 –– 1122
Connectors:
Impedance, Bal/Unbal:
Max Input Level (incl. PAD):
THD:
Dynamic Range:
Freq. Response:
Crosstalk:
AADDCC
A to D Conversion:
A to D Delay @ 192/96/48 kHz:
MMiicc.. IInnppuuttss CChh.. 1
1,,22,,33,,44
Connectors:
Sensitivity Full Range Pad on/off:
Total Preamp gain:
Impedance, Pad on/off:
NF @ Rg = 150 ohm, Max. Gain:
EIN @ Rg = 150 ohm, Max. Gain:
THD, Min. Gain:
Dynamic Range, Min. Gain:
Crosstalk:
IInnsstt.. IInnppuuttss CChh.. 11,,22,,33,,44
Connectors:
Sensitivity Range:
Total Preamp gain:
Impedance:
THD, Min. Gain:
Dynamic Range, Min. Gain:
Crosstalk:
LLiinnee OOuuttppuuttss CChh.. 55 –– 1122
Connectors:
Impedance:
RCA Phono, 75 Ohm
S/PDIF (24 bit), IEC 958, Pro-status bits
Optical Pipe
8-ch. @ 48 kHz, 8-ch. SMUX @ 96 kHz
BNC, 75 Ohm, 1 x Fs, 2.5 Vpp terminat-
ed, rising edge reference
IEEE 1394a, S400, IEC 61883
30 to and 28 from the DAW
TC DICE II, handling all IO formats
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,
176.4 kHz and 192 kHz
+/- 30 PPM
43 to 193 kHz, jitter rejection at all rates
JET™ technology in TC DICE II
< -3 dB @ 10 Hz, < -100 dB @ 600 Hz
< 1 ns peak, BW: 700 Hz to 100 kHz
< 42 ps RMS, BW: 100 Hz to 40 kHz
< 0.5% of Sample Period
+50% to -50% of Sample Period
0.09/0.19/0.38 ms
DC to 23.9 kHz 0.01 dB @ 48 kHz
1/4” TRS Jack (Balanced)
20 kOhm/25 kOhm
+13 dBu or +25 dBu
< -90 dB (0.003%) @ 1 kHz, -1 dBFS
< -101 dB(A), 20 Hz to 20 kHz
+0/-0.5 dB, 20 Hz to 20 kHz
< -95 dB, 20 Hz to 20 kHz
24 bit, 128 x Oversampling Bitstream
0.15/0.3/0.61 ms
Neutrik Combo (XLR)
-10/+10 dBu <> -52/ -32 dBu
62 dB
2000/1300 ohm
< 3 dB
< -128 dBu
< -95 dB (0.002%) @ 1 kHz, -1 dBFS
< -106 dB(A), 20 Hz to 20 kHz
< -75 dB, 20 Hz to 20 kHz
Neutrik Combo (1/4” TRS Jack)
-25 dBu <> +17 dBu
42 dB
1 Mohm
< -93 dB (0.002%) @ 1 kHz, -1 dBFS
< -105 dB(A), 20 Hz to 20 kHz
< -90 dB, 20 Hz to 20 kHz
1/4” TRS Jack. Balanced/unbalanced.
100 Ohm
Max Output Level:
THD:
Dynamic Range:
Freq. Response:
Crosstalk:
MMaaiinn OOuuttppuutt 11,,22
Connectors:
Impedance:
Max Output Level:
THD:
Dynamic Range:
Freq. Response:
Crosstalk:
DDAACC
D to A Conversion:
D to A Delay @ 192/96/48 kHz:
HHeeaaddpphhoonneess OOuuttppuutt ((CChh.. 33//44,, 1111//1122))
Connectors:
Impedance:
Max Output Level:
THD:
Dynamic Range:
Freq. Response:
Crosstalk:
Power @ 40 Ohm Load:
Power @ 600 Ohm Load:
EEMMCC
Complies With:
SSaaffeettyy
Certified To:
EEnnvviirroonnmmeenntt
Operating Temperature:
Storage Temperature:
Humidity:
CCoonnttrrooll I
Inntteerrffaaccee
MIDI:
FireWire (DAW):
GGeenneerraall
Dimensions:
Weight:
Finish:
PPM Meter (Ch. 1 – 4):
Stereo PPM (Ch. 5 – 12):
Mains Power Supply:
FireWire Bus Powered:
Power Consumption:
Warranty Parts and labor:
+13 dBu
< -95 dB (0.002%) @ 1 kHz, -1 dBFS
< -103 dB(A), 20 Hz to 20 kHz
+0/-0.3 dB, 20 Hz to 20 kHz < -90 dB,
20 Hz to 20 kHz
XLR. Balanced.
100 Ohm
+13 dBu (analog gain scale)
< -93 dB (0.002%) @ 1 kHz, -1 dBFS
< -103 dB(A), 20 Hz to 20 kHz
+0/-0.1 dB, 20 Hz to 20 kHz
< -99 dB, 20 Hz to 20 kHz
24 bit, 128 x Oversampling Bitstream
0.1/0.2/0.4 ms
2 x 1/4” TRS Jack (Stereo)
80 Ohm
+18 dBu (analog gain scale)
< -90d B (0.003%) @ 1 kHz, -1 dBFS
< -101 dB(A), 20 Hz to 20 kHz
+0/-0.2 dB, 20 Hz to 20 kHz
< -90 dB, 20 Hz to 20 kHz
200 mW
93 mW
EN 55103-1 and EN 55103-2, FCC part 15,
Class B, CISPR 22, Class B
IEC 60065, EN 60065, UL6500 and CSA
E60065 CSA FILE #LR108093
32° F to 122° F (0° C to 50° C)
-22° F to 167° F (-30° C to 70° C)
Max. 90% non-condensing
In/Out: 5 Pin DIN
IEEE 1394a, IEC 61883
19" x 1.75" x 7.3" (483 x 44 x 185 mm)
5.5 lb. (2.5 kg)
Anodized aluminum front panel. Plated
and coated steel back/top plate.
6 LEDs pr. mono channel.
6 LEDs pr. stereo channel.
90 to 240 VAC, 50 to 60 Hz (Auto Select)
No
<25 W
1 Year
TECHNICAL SPECIFICATIONS
70
 previous