Filter
Top Products
FFeeaattuurreess iinn tthhiiss sseettuupp
• One stereo set of active speakers and one active Sub.
The sub is fed with both the LFE channel signal and
lo-freq signal from the main channels via bass
management.
• Two separate sends for monitoring on headphones via
AUX 1 and AUX 2 sends on the TC Near mixer page
• Computer with TC Near control panel and DAW
application
• Integrated external digital reverb via S/PDIF and the
Integrator plug-in*
• Integrated external analog filter via analog line I/O
* Please refer to the instructions for the Integrator plug
in on the following pages.
SSeettttiinngg uupp
• Select DAW Main Out 1+2 as source. Set
speaker to “on” and assign to main.
• Select DAW Line Out 8 as source and
assign this channel as “SUB”.
• We have set a typical X-over frequency
of 95 Hz. Low-pass is set to 24 dB/oct
and High-pass to off.
SETUP EXAMPLES - BASS MANAGEMENT & INTEGRATION
25