Filter
Top Products
FABRIK C STUDIO
47
Gain Control
The Gain settings are very important.
The higher set In Gain the harder the signal meets the
Compressor Threshold.
• Grab GAIN and move the symbol in vertical and
horizontal directions to set both In Gain and Make-up
gain with just one handle.
The Threshold is automatically set when the Source type
is selected, however, the Gain parameters determine how
hard the signal meets the Threshold.
Depending on how the Compressor parameters are set,
the level will change. The Make-up Gain parameter is
used to compensate for this level change.
In Gain Range: -18 to +18 dB
Make-up Gain: -18 to +18 dB
Compression
3-band and Full-band modes
Gain page
Source selection
- via the drop down menu
Source Selection
Use the drop-down menu to select which type of material
you are processing.
Each type selects a carefully tuned combination of the
essential compression parameters: Attack, Release,
Threshold and Ratio.