Filter
Top Products
PRESET HANDLING: FABRIK C & FABRIK R
58
Preset Handling
The comprehensive file-based preset architecture makes
storing presets a simple process. Presets are saved as
discrete files on your hard drive. Once a preset is saved
on the default location, it automatically appears in the
“File” menu.
Preset File Menu
Pressing the File button will open the File menu.
The File menu allows you to load or save into the
currently selected program. P1, P2 and P3.
The following options are available from the File menu.
LOAD
By selecting Load, you can navigate to any folder in the
system, including shared folders. By default you will be
directed to the default location for Studio Konnekt 48
presets. Only presets located in the default file locations
for TC Near control panel will be visible in the drop down
menu.
SA
VE
By selecting “Save”, you can save your preset to any
folder in the system that you have write access to,
including any shared folder. By default, presets are saved
to the default location of the TC Near control panel
presets.
P1, P2 & P3
The TC Near control panel has 3 preset locations you can
load and save presets from and to. These presets are
“total recall” and hold all settings on all pages including
settings for the Fabrik plug-ins.