Filter
Top Products
TASCAM CD-601MKII 9
NAMES & FUNCTIONS OF PARTS
໋PLAY/PAUSE key (¥/π)
When this key is pressed while disc operation is stopped,
in the online READY mode or during monitor playback,
the CD player enters the monitor PAUSE mode. When
it is pressed in the monitor PAUSE mode, monitor
playback is started.
During monitor playback, this key is lit yellow, and in the
monitor PAUSE mode, it blinks. (→ page 15 “Details of
Transport Key Operations”)
໌ENTER key
Press this key to apply selections or settings during
menu operations.
ໍREADY key (π)
Pressing this key sets the CD player to the online
READY mode.
The online READY point differs according to the state
of the CD player when this key is pressed. (→ page 15
“Details of Transport Key Operations”)
໎+/- key
This key is used to select items or setting values during
menu operations.
It is also used to set pitch control values.
STOP key (ª)
Pressing this key stops disc operations. This key is lit
while disc operations are stopped. (→ page 15 “Details
of Transport Key Operations”)
໐TRACK (Â/¯) key
This key is used to perform a track search (skip). An
index search is performed when the INDEX indicator is lit.
The operation after a skip differs according the operation
state when this key is pressed, the auto cue settings, and
auto cue up setting. (→ page 16 “Selecting the Track”)
໑SEARCH (∆/˚) key
Holding down this key during monitor playback or in the
monitor PAUSE mode performs a cue search. (→ page
16 “Searching for an Intermediate Point in a Tune”)
໒PHONES level knob
Adjusts the headphone output level.
໓PHONES jack
This is the standard phone jack for connecting stereo
headphones. When connecting a mini plug headphone,
use a conversion adapter.
໔Display window
This window displays disc information, CD player
operation mode, menus, and various other information.
CD-601MKII_Eng.indd 9 3/26/2005 7:39:46 PM