Filter
Top Products
TASCAM CD-601MKII 17
MENU OPERATIONS
Various settings on the CD player can be made using the menu system.
Menu Configuration
The menu contains the following items.
Menu
No.
Item Display Details Display Description Reference Item
01 A_CUE Auto cue level Auto cue level setting “Setting the Auto Cue Level” (p. 21)
02 ONLINE Online play output Setting the terminals for online
output
“Setting the Terminals for Online
Output”
(p. 22)
03 MONI Monitor output Setting the terminals for monitor
output
“Setting the Terminals for Monitor
Output”
(p. 22)
04 CLOCK Clock source Operation clock setting “Referencing to an External Clock
Source”
(p. 23)
05 PROG Program setting Program setting “Program Playback” (p. 20)
06 INCR_P Incremental play Incremental play ON/OFF “Incremental Play Function” (p. 21)
07 TIMER Timer play Timer play ON/OFF “Timer Play Function” (p. 24)
08 OUTPUT Output stereo mono Output stereo/monaural setting “Setting Stereo/Monaural” (p. 22)
09 OUT_L Output level Output level setting “Setting the Output Level” (p. 22)
10 F_SAFE Fail safe Failsafe function ON/OFF
during online playback/READY
“Failsafe Function” (p. 23)
11 EOM End of message time End of track warning display
setting
“Displaying the End of Track
Warning” (p. 23)
12(*) E_CHK End check time End check time setting RC-601MKII Owner’s Manual
13(*) BANK Memory BANK select Memory back selection RC-601MKII Owner’s Manual
14 F_STAR Fader start polarity Setting fader start polarity “Setting fader start/stop” (p. 25)
15 F_STOP Fader stop state Setting the state of the CD
player at a fader stop
“Setting fader start/stop” (p. 25)
16 CUE_UP Auto CUE up state Setting the CD player standby
mode during an auto cue or an
auto ready
“Auto Ready Function” (p. 21)
17(*) RMT Remote control CD player operation enable/
disable setting when remote
control (*) RC-601MKII is used
RC-601MKII Owner’s Manual
18 FRAME Frame display Setting the frame display of the
time display area of the display
window
“Clearing the Frame Display” (p. 24)
19 TIME Time display Setting the time display
switching pattern
“Switching the Time Display” (p. 23)
20 CUESET Cue point set Cue point setting “Auto-registering Cue Points” (p. 14)
21 A_CLR Memory ALL clear Memory all clear “Clearing Menu Settings” (p. 19)
22 USER User setting Calling up user banks to save
settings to
“Saving Menu Settings” (p. 19)
23 RS232C Com PORT baud rate RS-232C baud rate setting “Setting the baud rate” (p. 26)
(none) xxxxH Motor addition time
display
Motor total drive time display “Viewing the Total Motor Time” (p. 24)
* Menu items followed by an asterisk (*) in the above table are valid when the Remote Control Unit RC-601MKII (sold
separately) is connected.
For details on these menu items, refer to the RC-601MKII Owner’s Manual.
CD-601MKII_Eng.indd 17 3/26/2005 7:39:50 PM