Filter
Top Products
TASCAM CD-601MKII 23
OTHER FUNCTIONS & SETTINGS
Referencing to an External Clock Source
The CD player can be operated referenced to an external
digital clock.
1 Connect the word clock from an external source to the
WORD SYNC IN terminal on the rear panel.
2 Set menu No. 04 (“CLOCK”) to “EXT”.
“EXT CLK” and the sampling frequency (“44.1k” or “48k”) are
lit on the clock display area of the display area.
The default setting is “INT” (referenced to internal clock).
Failsafe Function
The failsafe function is a safety function for preventing
playback from discontinuation when an operation key is
touched inadvertently during a final take.
In the default setting, the failsafe function is ON, and
operation of keys other than STOP, PLAY MODE and DISP
MODE is not accepted during online playback. Also, in the
online READY mode, operation of search-related keys such
as the TRACK key and numeric keys and the MENU key is
not accepted.
When the failsafe function is set to OFF (“OFF”) using menu
No. 10 (“F_SAFE”), all keys (excluding the SEARCH key
during online playback) are functional.
Displaying the End of Track Warning
The end of track warning (EOM = End of Message) can be
displayed in the display window in the online playback and
monitor playback modes. (In the default setting, the warning
is not displayed.)
When the end of track warning is set to be displayed, the
countdown to the end of the track is displayed.
Set the end of track warning display using menu No. 11
(“EOM”).
OFF (default setting): The end of track warning is not
displayed.
10, 15, 20, 30, 60, 90: The countdown display starts from
the end of the track by the preset
number of seconds.
Switching the Time Display
Each press of the DISP MODE key during playback
switches the time information in the display window. As the
default setting, the time display mode is switched between
“track elapsed time” and “track remaining time.”
The type of time display that is switches using the DISP
MODE key can be selected in menu No. 19 (“TIME”).
Selections are displayed at 1 to 4.
1 (default setting): Track elapsed time ⇔ track remaining
time
2 : Track elapsed time ⇔ track remaining time ⇔ disc
remaining time
3 : Track elapsed time ⇔ track remaining time ⇔ disc
remaining time ⇔ disc total time
4 : Track elapsed time ⇔ track remaining time ⇔ disc
remaining time ⇔ disc total time « track time
The current time display mode is displayed as follows at the
top of the display window.
Track elapsed time : (no display)
Track remaining time : REMAIN is lit.
Disc remaining time : TOTAL REMAIN is lit.
Disc total time : TOTAL is lit.
Track time : TOTAL blinks.
z The time display setting is backed up on the CD player.
So, the same setting is reproduced when the CD player
is next turned ON.
[
NOTE]
• While disc operations are stopped, the disc total time is
displayed.
CD-601MKII_Eng.indd 23 3/26/2005 7:39:54 PM