Tascam CD-200BT CD Player User Manual


 
TASCAM CD-200BT
29
8 – Specifications
Ratings
Supported disc types
CD, CD-R and CD-RW discs
(including 12cm, 8cm and multisession discs and discs
with CD text)
Playback file formats
CD-DA: 44.1kHz, 16-bit stereo
MP2: 32/44.1/48kHz, 32–384kbps (data CDs)
MP3: 32/44.1/48kHz, 32–320kbps, VBR (data CDs)
WAV: 8/16/32/11.025/22.05/44.1/12/24/48kHz, 16-bit
(data CDs)
Input and output ratings
Analog audio input
AUX IN jack
Connector: 3.5mm stereo mini jack
Reference input level: –20 dBV
Maximum input level: –4 dBV
Input impedance: 22 kΩ
Analog audio output ratings
ANALOG OUTPUT (UNBALANCED)
Connector: RCA pin jack
Output Impedance: 200 Ω
Reference Output Level: –10 dBV (0.32 Vrms)
Maximum Output Level: +6 dBV (2.0 Vrms)
PHONES output
Connector: 6.3 mm (1/4') Stereo Phone Jack
Maximum Output Level: 20 mW + 20 mW
(THD+N: 0.1%, 32Ω)
Digital audio output ratings
DIGITAL OUTPUT (COAXIAL)
Connector: RCA Pin Jack
Compatible Signal Format: IEC-60958-3 (S/PDIF)
DIGITAL OUTPUT (OPTICAL)
Connector: TOS (JEITA RC-5720C)
Compatible Signal Format: IEC-60958-3 (S/PDIF)
Audio performance
Frequency Response
20 Hz - 20 kHz ±1.0 dB (during playback, JEITA)
Signal-to-Noise Ratio (S/N)
More than 90 dB (during playback, JEITA)
Total Harmonic Distortion
Less than 0.01% (during playback, JEITA)
Dynamic Range
More than 90 dB (during playback, JEITA)
Channel Separation
More than 90 dB (during playback, JEITA)
Backup memory
The following settings are backed up even when the unit power
is turned off.
Time and title display settings
Playback mode
Program (when CD loaded)
Current folder (when data CD loaded)
Current source
Repeat playback function setting (ON/OFF)
Pitch control ON/OFF (CD)
Pitch control value (CD)
Bluetooth pairing information (up to 8 devices)
Bluetooth
Version: 3.0
Output class: Class 2
(approximate transmission distance: 10m*)
Supported profiles: A2DP, AVRCP
Supported A2DP codecs: SBC, AAC, aptX
Supported A2DP content protection: SCMS-T
*The transmission distance is approximate. The trans-
mission distance could vary depending on the surrounding
environment and electromagnetic waves.