Tascam CD-200BT CD Player User Manual


 
TASCAM CD-200BT
17
4 – CD playback
In this chapter, we explain playback functions that can be used
with tracks on CDs.
The following explanations assume that a CD that contains
audio files/tracks has been loaded in this unit, the power is ON
and the CD has been set as the current source. (See “Selecting
the audio to output (current source)” on page 16.)
Playable discs and files
This unit can play back the following types of discs and files.
8
CD-DA (audio CD) format discs
Music CDs that are commercially available and CD-R and CD-RW
discs that have been recorded as audio CD format can be played.
In this manual, these types of discs are called “audio CDs.”
8
Data CDs
This unit can play back CD-ROM/R/RW discs with MP3, MP2 and
WAV files in ISO 9660 Level 1, Level 2 and Joliet formats. In this
manual, these types of discs are called, “data CDs.”
NOTE
This unit cannot read CD-R/RW discs that have not been
finalized.
For details about playable sampling frequencies and bit
rates, see “Playback file formats” on page 29.
The sampling frequency of this unit’s digital output is always
44.1 kHz regardless of the playback disc/file sampling
frequency. Digital output is possible when pitch control is
ON, but the sampling frequency is altered in proportion to
the pitch control value. When the pitch control function is
ON, therefore, some equipment might not be able to receive
the digital output of this unit.
This unit’s display can only show single-byte characters
(alphabet and numbers). File with names that use Japanese,
Chinese or other double-byte characters can be played back,
but those characters will be shown as
_
on the display.
This unit identifies MP3 and MP2 files by their “.mp3” and
“.mp2” file extensions. This unit cannot play MP3/MP2
files that do not have the correct “.mp3” and “.mp2” file
extension, so always include these file extensions at the
ends of MP3/MP2 file names. This unit cannot play files that
are not in the MP3/MP2 data format even if they have an
“.mp3” and “.mp2” file extension.
The unit identifies WAV files with the ".wav" file extension.
This unit cannot play WAV files that do not have the ".wav"
file extension, so always include the ".wav" file extension at
the end of the name of an WAV file. The unit cannot play files
that are not in the WAV data format even if they have the
".wav" file extension.
Data CDs with more than 999 files or 512 folders might not
play correctly.
Depending on disc conditions, this unit might not be able to
play some discs, or skips in the sound might occur.
Folders and tracks on data CDs
This unit treats all the audio files on data CDs as “tracks”.
Some data CDs store files inside folders in the same way that
computers usually do. In addition, multiple folders can be
stored inside another folder creating a multilevel structure. (The
maximum number of folder levels is 16.)
You can use this unit’s folder search function to look for audio
files among multiple folders. Searching starts from high-level
folders and then moves to lower-level subfolders.
If there are audio files in the root directory of a data CD, this root
directory is also treated as a folder.
Folders that do not directly contain audio files will be ignored
when searching folders. For example, folders C and D in the
illustration below would be ignored when searching folders.
(Folder 01)
A
(Folder 02)
(Folder 03)
B
bb001.mp3(Track 001)
bb002.mp3(Track 002)
D
(Folder 04)
E
ee001.mp3(Track 001)
(No folder number)
C
cc001.txt(F
ile other than audio)
aa001.mp3(Track 001)
(No folder number)
00001.mp3(Track 001)
00002.mp3(Track 002)
ROOT
Example of data CD structure