Filter
Top Products
22
TASCAM CD-200BT
4 – CD playback
Adding more program tracks
You can add tracks to the end of an already set program.
1. Press the PROGRAM EDIT button on the remote control
while playback is stopped to activate program setting mode.
2. Press and hold the PROGRAM EDIT button until the empty
program step where it is possible to add a track appears. (No
track number is shown and
PROG
blinks.)
3. Use the remote number (0–9) buttons or skip (m/.
and //,) buttons to select the track to add and press
the PROGRAM EDIT button.
4. In this state, you can repeat step 3 to add more tracks, or
you can press the PROGRAM EDIT button to exit program
setting mode.
CAUTION
•
Although tracks can be added to the end of a program and
tracks can be replaced with different tracks, tracks cannot
be inserted into the middle of a program.
•
If you want to insert a track into the middle of the program,
replace and add program tracks to alter the program
contents.
Clearing the program
You can clear the entire program that has been set.
1. Press the PROGRAM EDIT button on the remote control
while playback is stopped to activate program setting mode.
2. Press and hold the PROGRAM EDIT button until the empty
program step where it is possible to add a track appears. (No
track number is shown and
PROG
blinks.)
3. Press the remote STOP button.
-CLEAR-
appears on the display. After clearing completes,
program setting mode resumes with the empty program.
In addition to the above procedure, opening the disc tray or
removing the disc also clears the program.
NOTE
•
CD programs are cleared when the disc tray is opened or the
current folder is changed.
Repeat playback
You can play back all the tracks in the playback area repeatedly.
Press the main unit REPEAT/INTRO CHECK [PITCH] button or
the remote REPEAT button to turn the repeat playback function
ON/OFF.
Repeat ON (REPEAT indicator appears)
All tracks are played back repeatedly.
Repeat OFF (no indicator)
Repeat playback is OFF.
NOTE
•
With data CDs, during folder playback all tracks within
the current folder will be played back repeatedly. During
program playback, all tracks within the program will be
played back repeatedly.
•
If the repeat playback function is turned ON during
playback, playback continues as is until the end and then
playback continues from the beginning.
•
If repeat playback is turned ON when stopped, repeat
playback begins when the PLAY/PAUSE button is pushed.
•
The repeat playback function’s ON/OFF state is retained
even when the power is turned OFF.