Filter
Top Products
60
GB
NAS-E35HD.GB.3-292-247-11(1)
“Over Current” appears.
A problem has been detected with the level
of electrical current from the (USB) port.
Turn o the unit and remove the USB device
from the (USB) port. Make sure there is no
problem with the USB device. If this display
pattern persists, contact your nearest Sony
dealer.
There is no sound.
e USB device is not connected correctly.
Turn o the unit, turn on the unit again, and
then reconnect the USB device. Make sure
that “USB MEMORY” lights up in the display.
There is noise, sound skipping, or distorted
sound.
Turn o the unit, then reconnect the USB
device.
e music data itself contains noise. Noise
may have been introduced when creating
music data due to the conditions of the
computer. Create the music data again.
The USB device cannot be connected into
the (USB) port.
e USB device is being connected backwards.
Connect the USB device in the correct
orientation.
“Reading” is displayed for an extended
time, or it takes a long time before playback
starts.
e reading process can take a long time in
the following cases.
ere are many folders or les on the USB
device.
e le structure is extremely complex.
e memory capacity is excessive.
e internal memory is fragmented.
us, we recommend following these
guidelines.
Total folders on USB device: 100 or less
Total les per folder: 100 or less
Erroneous display
Transfer the track to the USB device again, as
the data stored in the USB device may have
been corrupted.
e character codes that can be displayed
by this unit are numbers and alphabet only.
Other characters are not displayed correctly.
The USB device is not recognized.
Turn o the unit and reconnect the USB
device, and then turn on the unit.
Connect the supported USB device (page 71).
e USB device does not work properly. Refer
to the operating manual of the USB device for
how to deal with this problem. If the problem
persists, contact your nearest Sony dealer.
Playback does not start.
Turn o the unit, then reconnect the USB
device, and the turn on the unit.
Connect the supported USB device (page 71).
Press USB to start playback.
Play does not start from the rst track.
Set the play mode to Normal Play mode.