Filter
Top Products
18
GB
NAS-E35HD.GB.3-292-247-12(1)
Connect brown side
or
Connecting the speakers and antennas
Power cord
Connect the power cord to a wall outlet after all other
connections have been made.
If the plug does not fit the wall socket, detach the supplied plug
adaptor (only for models supplied with an adaptor).
Make sure to match the projections on the SPEAKER
terminals and the speaker cords, and insert the cords firmly
to the SPEAKER terminals.
Note
Do not connect speakers other than those supplied with this unit.
AUDIO OUT jack (for the Asian and Oceanian
models only)
Use to connect the optional audio component (such as a
cassette deck) through an audio connecting cord (optional).
Note
There is no audio output from these jacks while the AUDIO IN
function is selected.
DAB lead antenna (for the UK model only)
Connect white side
or
With a DAB external antenna (optional), you can
obtain a higher DAB broadcast sound quality. We
recommend that you use the supplied DAB lead
antenna only temporarily until you install a DAB
external antenna.
75 coaxial cable with F male type connector will be
needed to install the DAB external antenna (optional).
Speaker cords
Press down on the tab below the terminal and insert the
appropriate speaker cord.
Make sure the metal leads (not the part covered with vinyl
insulation) are securely inserted into the speaker terminals.
Insert the end of the cord marked with a red line into the +
terminal and the cord with no marking into the – terminal.