Filter
Top Products
22
GB
Specifications
Amplifier section
POWER OUTPUT
Rated Power Output*
8 ohms 1 kHz, THD 0.7%:
110 W + 110 W
4 ohms 1 kHz, THD 0.7%:
120 W + 120 W
Power requirements 230 V AC, 50/60 Hz
* Measured under the following conditions:
Power requirements: 230 V AC, 50/60 Hz
(in countries/area in Europe
other than UK)
240 V AC, 50/60 Hz
(in UK and general area)
Frequency response
Inputs (Analog)
Output (Analog)
Inputs (Digital)
Output (Digital)
TONE
General
Power requirements 230 V AC, 50/60 Hz
(in countries/area in
Europe other than UK)
240 V AC, 50/60 Hz
(in UK and general area)
Power consumption 100 W
Power consumption (during standby mode)
0.5 W
AC outlets 1 switched, 100 W/0.4 A
MAX (in countries/area in
Europe other than UK)
Dimensions 430 × 173 × 428 mm
including projecting parts
and controls
Mass (Approx.) 14.0 kg
Supplied accessories
Operating Instructions (this manual)
Optimizer microphone ECM-AC1 (1)
AC power cord (mains lead) (1)
Remote commander RM-AAU010 (1)
R6 (size-AA) batteries (2)
Design and specifications are subject to
change without notice.
PHONO RIAA equalization curve
± 0.5 dB
TUNER, SA-CD/CD,
TAPE
10 Hz – 40 kHz
± 3 dB (8 ohms)
PHONO Sensitivity: 2.5 mV
Impedance: 50 kohms
S/N: 86 dB (A, 20 kHz
LPF)
TUNER, SA-CD/CD,
TAPE
Sensitivity: 150 mV
Impedance: 50 kohms
S/N: 96 dB (A, 20 kHz
LPF)
TAPE Voltage: 150 mV
Impedance: 1 kohms
DIGITAL 1/2/3 Impedance: 75 ohms
S/N: 96 dB (A, 20 kHz
LPF)
DIGITAL 4 S/N: 96 dB
(A, 20 kHz LPF)
DIGITAL 4 S/N: 96 dB
(A, 20 kHz LPF)
TREBLE ±10 dB, 1 dB step
BASS ±10 dB, 1 dB step