Filter
Top Products
STR-DE995/895 4-244-963-11(1)GB
21
GB
Hooking Up and Setting Up the Speaker System
x Surround speaker size (SURR SP
[XXXXX])
• If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the surround
speakers to “LARGE”.
• If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the sub
woofer or other “LARGE” speakers.
• If you do not connect surround speakers, select
“NO”.*
3
Tip
*1–*3 correspond to the following Dolby Pro Logic
modes
*1 NORMAL
*2 PHANTOM
*3 3 STEREO
x Surround back speaker selection
(SB SP [XXX])
• If you connect surround back speaker(s), select
“YES”.
• If you do not connect surround back speaker(s),
select “NO”.
x Surround back left/right speaker
selection (SB L/R [XXX])*
)
(STR-DE995
only)
• If you connect two surround back speakers,
select “YES”.
• If you connect one surround back speaker,
select “NO”. The sound will be output from the
surround back left speaker (page 17).
* This parameter is not available when “Surround
back speaker selection (SB SP [XXX])” is set to
“NO”. When “SB SP [XXX]” is set to “NO”, “SB
L/R [XXX]” is automatically set to “NO” and you
cannot change this setting.
x Front speaker size (FRONT SP [XXXXX])
• If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
• If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer.
• When the front speakers are set to “SMALL”,
the center and surround speakers are also
automatically set to “SMALL” (unless
previously set to “NO”).
• When the sub woofer is set to “NO”, the front
speakers are automatically set to “LARGE” and
you cannot change this setting.
x Center speaker size (CTR SP [XXXXX])
• If you connect a large speaker that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the center speaker to
“LARGE”.
• If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
center channel bass frequencies from the front
speakers (if set to “LARGE”) or sub woofer.*
1
• If you do not connect a center speaker, select
“NO”. The sound of the center channel will be
output from the front speakers.*
2
continued