Filter
Top Products
20
GB
STR-DE995/895 4-244-963-11(1)GB
Multi channel surround setup
(continued)
45°
90°
20°
A A
B
CC
D
3 Turn the +/– (STR-DE995 only) or jog
dial (STR-DE895 only) to select the
setting you want.
The setting is entered automatically.
4 Repeat steps 2 and 3 until you have set
all of the parameters that follow.
Initial settings
Parameter Initial setting
SUB WOOFER [XXX] YES
FRONT SP [XXXXX] LARGE
CTR SP [XXXXX] LARGE
SURR SP [XXXXX] LARGE
SB SP [XXX] YES
SB L/R [XXX]
1)
YES
FRONT X.X meter (XX feet)
2)
3.0 meter (10 feet)
2)
CTR X.X meter (XX feet)
2)
3.0 meter (10 feet)
2)
SURR X.X meter (XX feet)
2)
3.0 meter (10 feet)
2)
SB X.X meter (XX feet)
2)
3.0 meter (10 feet)
2)
PL. [XXXXXXXXX] SIDE/LOW
1)
STR-DE995 only. This parameter is not available
when “Surround back speaker selection (SB SP
[XXX])” is set to “NO”.
2)
The default unit for models of area code U, CA is
“feet”.
The default unit for models of other area code is
“meter”.
x Sub woofer selection (SUB WOOFER
[XXX])
• If you connect a sub woofer, select “YES”.
• If you do not connect a sub woofer, select
“NO”. This activates the bass redirection
circuitry and outputs the LFE signals from other
speakers.
• In order to take full advantage of the Dolby
Digital bass redirection circuitry, we
recommend that you set the cut off frequency
on the sub woofer as high as possible.
When placing surround speakers behind you
(wide room)
Tips
• When you set up the surround back speaker, set the
speaker at least 1 meter behind the listening
position. It is recommended to place the speaker at
an equal distance from the surround left and right
speakers. If there is no space behind the listening
position, set the speaker above the listening position
by placing it on a stand or hanging it from the
ceiling. To prevent speaker damage or injury in case
the speaker falls, make sure that it is properly fixed
in place.
• Since the active sub woofer does not emit highly
directional signals, you can place it wherever you
want.
Note
Do not place the center speaker further away from the
listening position than the front speakers.
Specifying the speaker
parameters
1 Press MAIN MENU repeatedly to select
“ SET UP ”.
2 Turn MENU (STR-DE995 only) or press
/ (STR-DE895 only) to select the
parameter you want to adjust.
Note
Some speaker settings may appear dimmed in the
display. This means that they have been changed
automatically due to other speaker settings or may
not be adjustable.