Filter
Top Products
14
Receiver Operations
Note
Pressing a SYSTEM CONTROL/FUNCTION button
will activate the component indicated for that button
(i.e., the component connected to the respective
connector). If, however, the connected component is
different from the one indicated for the button, the
component will not be activated when the button is
pressed only once.
For example, to watch Sony LD player connected to the
VIDEO 2 jacks (as shown on page 9):
Press VIDEO 2 to switch the function, then press LD to
set the remote control to operate the LD player.
To play the decoded Dolby Digital AC-3 program
source connected to the 5.1 INPUT jacks (STR-
DE715/DE615/D660Z/D560Z only)
Press 5.1 INPUT so that the 5.1 INPUT indicator on
the main unit lights up.
If you want to change the factory setting of a
button
See page 29.
If the component does not turn on
Press the power switch on the component.
2 Start playing.
See “Remote Button Descriptions” on page 37 for
details.
To turn off the components
Press SYSTEM OFF. This will also turn off the video/
audio component(s) connected to AC OUTLET on the
back of this unit at the same time.
z If you use a Sony TV
When you press TV to watch a TV program, the TV
turns on and switches to the TV input. The TV also
turns on automatically and switches to the appropriate
video input when you press VIDEO 1 or VIDEO 2. If the
TV does not switch to the appropriate input
automatically, press TV/VIDEO on the remote.
z Watching TV without the receiver (for Sony TVs only)
Press TV CONTROL ON to set the remote to operate TV
functions only. When you press this button, the TV
turns on and switches to the TV input. If the TV does
not automatically switch to the TV input, press TV/
VIDEO.
z To select another component when a decoded Dolby
Digital AC-3 program source is selected (STR-DE715/
DE615/D660Z/D560Z only)
Press any SYSTEM CONTROL/FUNCTION button to
turn off the 5.1 INPUT indicator on the main unit.
Making components selectable/
unselectable
You can do these settings so that certain components
become unselectable even if you press AUDIO/VIDEO
FUNCTION.
1 Press SET UP repeatedly to select FUNCTION
HOOKUP (STR-DE915/DE715/D660Z only) or
FUNC HOOK UP (STR-DE615/D560Z only).
2 Use the digital processing control buttons ( /
) to select a component.
3 Use the digital processing control buttons ( /
) to select YES (selectable) or NO (unselectable)
(STR-DE915/DE715/D660Z only) or –Y–
(selectable) or –N– (unselectable) (STR-DE615/
D560Z only).
Notes
• When the receiver accepts the signal from the S-LINK
CTRL A1 jack or CTRL S (STATUS) IN or OUT jack to
select that component which is set to NO on the receiver,
the setting changes to CONNECT or YES automatically
and the component is selected (STR-DE915/DE715 (USA,
Canada) only).
• If you try to select the component which is set to NO or
–N– using the remote, “NO CONNECTION” (STR-
DE915/DE715/D660Z only) or “CANNOT USE” (STR-
DE615/D560Z only) appears in the display.